Why Stearns & Foster®?

Our foundations look similar to a standard box spring. But instead of the ‘give’ of a box spring, our foundations provide a solid base for our mattresses.

Foundations help support the mattress to prevent bowing or sagging. A flat surface with sufficient center support is required to ensure complete warranty protection for a Stearns & Foster® mattress.

All Stearns & Foster® flat foundations are made from high-grade wood, with a support structure constructed from high-gauge steel wire.

We encourage you to buy a foundation when you buy your mattress; it provides the solid base your mattress requires to do its job properly. If you choose not to purchase our foundation, you must position the mattress on a completely flat, solid surface with adequate center support. Please note that using the mattress without a Stearns & Foster® foundation or similar firm, solid-surface, non-spring base may void the warranty.

No, you should not place the mattress on a box spring. Box springs are designed to ‘give-in’ supporting a traditional mattress, while Stearns & Foster® mattresses require a solid base.

If your platform bed has a solid surface and strong center support that can properly support the mattress, you can use it instead of a foundation. However, if the platform bed uses slats to support the mattress, you may be using an improper foundation that will void your warranty.

No. A box spring is designed to support a traditional spring mattress, and it ‘gives’. Placing a piece of particleboard or plywood over a box spring will produce a surface that is unstable and will void your warranty.

We designed each of our foundations to support the weight of a mattress plus two persons resting on top. Each foundation is designed to support approximately 600 pounds of weight.

We have made sure that our mattresses are compatible with any of our 3 power bases.

• For the Reflexion® Arc, the minimum height with legs is 5” and the maximum height is 17”.
• For the Reflexion® Boost 2.0, the minimum height without legs is 3.75” and the maximum height with legs is 15.7”.
• For the Reflexion® Lift 2.0, the minimum height without legs is 3.75” and the maximum height with legs is 15.7”.

Our power bases support up to 650 lbs. each (Twin Long, Full, Queen, and Split King bases). All power bases will structurally support the recommended weight distributed evenly across the head and foot sections. Power base products are not designed to support or lift the amount of weight in the head or foot sections alone.

We have found that the power bases fit inside most modern bed frames. However, they may not fit inside antique bed frames or other non-standard frames. We recommend you measure the inside of the bed frame and compare to the measurements provided to be sure the power base will fit.

To locate the serial number for your power base, look at the law tag attached to the cover, the power down box under the base and on the frame right below the foot end of the base. It may be easier to see by lifting the foot slightly if possible. The serial number is also printed on the owner’s manual shipped with the base.

Many of us forget that our mattresses are the most utilized piece of furniture we own. In fact, if you sleep eight hours a night, in one year you’ll rack up 3000 hours on your mattress. After ten years, you’ll have logged 30,000 hours on the same bed. Listed below are a few hints that indicate it’s time to start thinking about renewing your sleep surface.

1. You bought your current mattress over eight years ago. The average life span of a quality mattress is eight to ten years. Mattresses older than that suffer from deteriorating comfort features and diminished support capabilities.
2. You wake up feeling more tired than when you went to sleep. Most consumers wait too long to replace their mattresses. If you don’t wake up feeling refreshed and rejuvenated—or if you feel any pain or discomfort—you've definitely waited too long.
3. The couch feels more comfortable than your bed. Concentrate on the feel of your mattress. Do you feel coils or bumps? Your body needs a smooth, comfortable sleep surface to get a regenerative night’s sleep. Your mattress should enable you to sleep through the night with minimal tossing and turning.
4. Your mattress looks worn and uneven. Inspect your mattress regularly for sags and imprints. If your mattress appears uneven or worn and frayed, maybe it’s time to start shopping. The upholstery layers in all mattresses compress over time. For optimal performance, be sure to rotate your mattress occasionally to extend its durability and renew its comfort. If you ‘inherited’ your mattress from a family member or friend, chances are you need to replace it now.
5. You’ve taken your mattress for granted. Mattresses are the most used yet most ignored piece of furniture in the house. Pay attention to your mattress. Do you hear creaks and groans? Do you notice the surface sags or indents in certain areas and not in others? The condition of your mattress may come as a surprise, once you take a close look.

Sleep is one of the best investments you can make, so buy the best mattress you can afford. Keep in mind that most of us spend as much as one-third of our time in bed. Your investment will cost just pennies per night over the next ten years! In fact, a $2000 Stearns & Foster® sleep set costs about 55 cents per night.

Yes! A good foundation is as important as a good mattress! It acts much like a large shock absorber, taking a lot of the nightly wear and tear, and it contributes to your comfort and support. Don’t put a new mattress on an inappropriate foundation. When you select the mattress, purchase its companion foundation. The two are designed to work best together.

The Better Sleep Council advises consumers to buy the highest-quality bedding they can afford, then replace old bedding every eight to ten years. After this many years, even the best bedding may no longer provide the comfort and support you deserve.

Focus on finding a sleep set that satisfies your comfort preference first, then your quality preference. To do so, always shop wearing comfortable clothes and shoes that can easily be removed for lying down. Take your time and don't be shy. You can't judge support and comfort by sitting on an edge or lying down for just a few seconds. Lie on the bed the way that you sleep, and if you sleep with a partner, try shopping with them so you can decide together. Shop at a store that you know and trust, and that offers services you desire. Read as much information about the sleep set as is available. Remember, buy the best bed that you can afford. You can always find ‘bargain bedding,’ but it's no bargain if you can't get a good night's sleep!

No, it's not true. Stearns & Foster® components, which meet the highest-quality standards in the industry, are not offered in products promoted by ‘factory to you’ stores. Don't be fooled by ‘factory to you’ stores, selling products that are ‘just like a Stearns & Foster®.’ There is no substitute for a Stearns & Foster® sleep set.

No, the design and manufacturing of bedding has changed dramatically – even over the last few years! Innerspring technology has improved, new ‘comfort’ upholstery materials have been developed, and comfort choices have been expanded to give consumers a greater selection!

The best way to really know what you're buying is to experience a top-quality pillowtop, then firm, then a plush sleep set. Determine the comfort you prefer, then compare your comfort preference in three qualities—top- of-the-line, mid-range and lower range, and understand the differences. This comparison helps you make an informed decision. If you like the comfort and price, the store services, and possible financing options, you can make your purchase at the first store. If you decide to shop another store, know the type of sleep set and its significant features, such as the type of innerspring unit, key comfort layers, type of edge support and significant features of the foundation.

Children's bodies aren't just always moving, they're always changing, and through all of those changes, their growing backs need support. Don't skimp when buying a new sleep set for your child. With a Sealy® or Stearns & Foster®, your children will get the comfort they want with the support their developing bodies need.

Most bedding retail stores will assist with the disposal of old bedding as a value-added store service. Ask about this type of service before you purchase!

Children should have a comfortable, supportive mattress to get the deep restorative sleep their bodies need to grow. If your old sleep set was uncomfortable and lacked support, then it probably won't help your kids get a good night's sleep either.

No! Stearns & Foster® sleep sets offer correct support regardless of comfort level or price. Whether your Stearns & Foster® is firm or plush, it will give you the same correct back support you need.

For consumers who don't want the extra height that comes with today's bedding, Stearns & Foster® offers a low profile foundation, cutting the height of the foundation by up to 4 inches! Or you can always opt for a zero clearance Reflexion® power base or a low-rise bed frame to also reduce the overall height of your mattress.

Below are the standard finished product sizes. Actual size may vary by model, generally within a range of ± ½inch to 1 inch.

Twin Long: 79.5" x 38"

Full: 74" x 53"

Queen: 79.5" x 60"

King: 79.5" x 76"

*Product sizes are listed in Length x Width

King-size foundations and split queen foundations come in two pieces for easier access through narrow halls.

Today's mattresses are manufactured with much more upholstery padding and comfort layers than in days gone by! Many consumers prefer the plush and ultra-plush comfort that these thick mattresses provide. You can find deep-pocketed sheets in most retail stores today.